(PCB) is designed to organize the circuit board.To make a PCB, draw a prototype on the breadboard to see if a design works.Copper side of PCB for welding;The other side contains all electronic components.
Use a special solution to create the pattern before thoroughly flushing the pattern.Instead of creating a new one.The purpose of the PCB is to maintain the organization of the board.If something goes wrong with the board, it\'s relatively easy to fix.
Electronic devices contain boards, but it is not always easy to find the right board.That\'s why it\'s important to make a PCB.Before deciding to make a PCB, it is necessary to have a good idea of what needs to be achieved.This means drawing some kind of plan or prototype.
Another term for this prototype is \"Breadboard \".\\ \"Its creation is critical because it allows
PCB manufacturers to see which ones can work and which ones cannot work before deciding to put time and effort into making the PCB.A circuit pattern is designed according to the research results of the circuit board.
It is possible to create it with pen and paper, although it may be a better idea to finish it on a computer.Determine the electrical size before starting to make the PCB.When making a PCB, it should be noted that each board has two sides.
One side will be welded to the other side used for the part.Keep in mind that the copper surface of the PCB is the side that must be welded.Occasionally, there may be a trace of tin on the surface of the copper to make it look cleaner.
, Make sure that the copper side is exposed to light when making the pattern.To protect the wires, there should be some kind of transparent covering for all the wires.Etching patterns on the board using special solutions.
This ensures that all unwanted copper is removed from the weld side.Wash the board carefully with water.If there is any problem with the PCB, use the voltmeter to determine which circuit is faulty.There is usually a PCB layout.Copy one of these plans and make a board at home.
