Rocket PCB  >  AI - Page Sitemap  >  advanced technology prototype pcb assembly pcb assembly components for wholesale
advanced technology prototype pcb assembly pcb assembly components for wholesale

Advanced technology prototype pcb assembly pcb assembly components for wholesale

Name:
Embedded PCB
Material:
FR4
Board thickness:
1.6mm
Surface treatment:
Immersion Gold
Technology:
Embedded thin film resistor, embedded capacitor
Payment:
L/C,T/T,WesternUnion
Certification:
UL Consumer (Wear, Electronic Digital, Household Appliances, Connectors)/Industrial Control/Automobile TS16949/Medical/Server, Cloud Computing & Base Station/Aviation/Military/Communication (Certification in Related Applications)
Delivery Term:
DDU, FOB, CFA, CIF, CPT, EXW
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Rocket PCB is the outcome of sophisticated manufacturing processes. During the production stage, the nominal voltage, power source type, rated power, insulation, and water resistance grade have gone through repeated experiments and testing. Its signal paths are well organized and exposed quite well
2. This product is considered to be one of the most promising products on the market. The electronic components and their polarities on it are clearly labeled
3. The product features safety in use. Controlled by an advanced and intelligent circuit, it has the overvoltage, overcurrent, and overheating protection. It plays an important role in modern electronic equipment

advanced technology prototype pcb assembly pcb assembly components for wholesale-1

=

Passive and active chips can be embedded in PCB using two basic processes: face-down and face-down. The two variants differ in the way components are connected to the outside world and use different materials and processes. Figure 1 outlines these two approaches.

advanced technology prototype pcb assembly pcb assembly components for wholesale-2

In the front process, the component is placed on the carrier material, and the contact pad of the component can be seen after assembly. This method provides some very good thermal performance and is very suitable for power module embedding. Processing constraints are encountered when trying to embed components with variable thickness. After embedding, the dielectric thickness between the component surface and the external copper surface remains unchanged, which poses a challenge to the subsequent micro-laser drilling and copper plating technology, especially in the case of via filling.

In the face-down process, the component and the component image are assembled together into the carrier material. Normally, screen-printed non-conductive adhesives are used as carriers for fixing components. This method has several advantages: good thickness control of dielectric materials between components and carriers, and good registration accuracy in assembly process. The reason for the improvement of alignment capability comes from the fact that the camera of the assembly machine can see the image of the component, so it can be aligned before the assembly is completed.

In frontal technology, the camera is aligned to the contour of the component.

Using face-down technology, several components of different thickness can be embedded into the FR-4 core. The prepreg used for embedding is removed to form a cavity around the assembly. Prepregs with openings are stacked to the height of the assembly and are provided with non-openings at the top. By opening the dielectrics to various heights of the components, usually ranging from 100 to 350 um, it is easy to achieve different thickness embedding. Then, the embedded kernel can be used as the standard inner core and included in the PCB multi-layer structure. External SMD components can then be assembled on both sides of an embedded PCB to form very high-density modules/components (see Figure 2).

advanced technology prototype pcb assembly pcb assembly components for wholesale-3


Embedded capacitors have many advantages, such as saving surface space, improving the product rate of device assembly, reducing power supply noise, reducing electromagnetic interference, simplifying circuit board design, and also raising higher challenges to equipment processing technology.

advanced technology prototype pcb assembly pcb assembly components for wholesale-4


Product FEATURES


advanced technology prototype pcb assembly pcb assembly components for wholesale-5

  ◪   Reduce surface mounting area by embedding chip components (resistors/capacitors)

  ◪   Improve electrical performance by shortening the wiring distance between surface-mounted ICS and embedded components

  ◪   Shorten the space between components and better heat resistance can be achieved by using a connection between the laser through holes and the copper-plated component terminals



Product application


advanced technology prototype pcb assembly pcb assembly components for wholesale-6                
Consumer electronics
advanced technology prototype pcb assembly pcb assembly components for wholesale-7                
Automotive electronics
advanced technology prototype pcb assembly pcb assembly components for wholesale-8                
Communications
advanced technology prototype pcb assembly pcb assembly components for wholesale-9                
Energy
advanced technology prototype pcb assembly pcb assembly components for wholesale-10                
Industrial & Instrumentation
advanced technology prototype pcb assembly pcb assembly components for wholesale-11                
IOT/Smart Home
advanced technology prototype pcb assembly pcb assembly components for wholesale-12                
Medical electronics
advanced technology prototype pcb assembly pcb assembly components for wholesale-13                
Security Industry

Company Features
1. Rocket PCB Solution Ltd. specializes in prototype pcb assembly over the years In personnel training, Rocket PCB Solution Ltd. has plenty of technology-oriented R&D team for pcb printed circuit board .
2. The skillful engineers of Rocket PCB are very good at producing prototype pcb with exquisite performance.
3. The technological equipment of Rocket PCB Solution Ltd. and its technical level for quick turn pcb comes up to the advanced level in China. We take efforts to build cooperative relationships with clients based on mutual trust. We work with them to minimize business risk and maximize profits range so as to promote mutual development.
Thanks to the low cost of raw materials and the high efficiency of streamlined production, quick turn pcb products have the advantage of high gross profit margin. It improves the wiring density and reduces the spacing of components
Rocket PCB pcb printed circuit board comes in a variety of wonderful designs. It is specifically designed to lessen the chances of shorts and wiring issues
High technical assurance and first-class quality can be seen on prototype pcb assembly. It reduces the need for interconnecting wiring
All raw materials used to manufactured Rocket PCB prototype pcb have to go through stringent quality checking procedure. It reduces the need for interconnecting wiring
The design of Rocket PCB quick turn pcb focuses on the technique and function. Its components are always soldered in, which contributes to durability
quick turn pcb has advantages both in cost, reliability and long life, in comparison with other similar products. The product brings reliability in the performance of the circuit
Product Message
Chat Online
Chat Online
Leave Your Message inputting...
Thank you for your attention. Please kindly describe your question first, or please send your inquiry to our email sales@rocket-pcb.com, and we will reply to you ASAP. Welcome, what can I help you?
Sign in with: