plated gold column highly-rated staged for wholesale

Latest products

Wire Bonding pcb ENEPIG surface finished high quality PCB production

Wire bonding ENEPIG PCB bonding PCB gold wire bonding

High density HDI PCB 4+N+4 HDI PCB board manufacturing

Double Sided PCB prototyping FR4 2-layer PCB fast turn

Product Information
Feedback

Company Advantages
1. The design of gold column is quite reasonable in structure, both equal length and economical. Its compact design takes less space in a piece of application equipment
2. A sincere attitude to producing gold column is kept in each Rocket PCB staff's mind. The product allows the installation and repair process to be convenient
3. Equipped with advanced facilities, we focus more on the quality assurance. It makes the interconnections less bulky
4. This product has the consistency of product performance during a certain period. Its components are always soldered in, which contributes to durability
5. The product has passed our strict quality inspection and meets the international quality standards. Its parts are spaced evenly and traces are symmetric and uniform

About our product

Rocket PCB provides gold finger PCB, long-short gold finger PCB, staged gold finger PCB fabrication. Gold finger PCB put forward higher requirements for the manufacturing technology. If you don't have enough experience, it is easy to cause bad problems such as blackening, whitening, contamination,lateral erosion, scratch and other problems.

Rocket PCB has extensive experience in this field and have accumulated many years of processing experience. Through process optimization, improve film alignment, liquid concentration control, plating parameters and other links of optimization. Our gold finger quality fully meet customer requirements, won customer appreciation.

Why design gold finger

A unique PCBA needs to be interconnected with the motherboard, but it also needs to be easily replaced. Design a gold finger connected to socket, similar to the relationship between the power plug and socket.Because gold has good conductivity, inertia is strong, it can ensure the conductive effect while not oxidizing, at the same time, it can also ensure good enough conductivity after frequent insertion because gold is wear-resistant.

Generally speaking, the golden finger means that these fingers are plated with 5-30u”hard gold. Hard gold has better wear resistance, and can be guaranteed 20,000 times insertion without affecting the quality, it must be more than 5u”thick. However, the processing technology of hard gold is relatively complex, and the high thickness of gold consumes more gold salt, which directly results in high cost. In fact, many PCBs do not need frequent insertion, do not need to do thick gold, or even do not do hard gold, directly do immersion gold replacement (soft gold, gold thickness is generally 1-3 u”). It can effectively reduce the purchase price of PCB.

Some common applications of golden fingers are:

◪ Provide interconnection points for transmitting network data.
◪ Where a sub-board or dedicated adapter is attached
◪ Connect external components to the prototype PCB
◪Use as an audio adapter

plated gold column highly-rated staged for wholesale-1

plated gold column highly-rated staged for wholesale-2

Elctroplate process

ENIG: ENIG is more cost-effective and easier to solder than the electric gold plating. But its soft and thin (usually 2-5u ")composition makes the ENIG unsuitable for achieving the abrasion effect caused by the circuit board insertion and removal.
Electroplated Hard gold: This gold is solid (hard) and thick (usually 30u "), so it is more ideal for achieving the abrasive effects caused by constant PCB usage.

There are many meticulous steps involved in the process of plating gold fingers. To ensure that all of these fingers and slots fit, each PCB must pass a series of inspections and defect tests.

TYPES OF GOLD FINGER

Standard gold finger：Gold fingers are of equal length.
Staged gold finger PCB ：The etching pattern of the golden finger position needs to be realized by multiple film pasting, exposure and solder masking. The position and pattern need to be strictly and accurately controlled.
Long-short gold finger PCB：Its process is similar to the staged gold finger, which requires multiple exposure and electroplating to obtain the graphics of the long- short gold finger and requires the following design rules: plated holes, SMD and pads should not be placed within 1.0 millimeters of the gold finger; plated pads cannot exceed 40 millimeters in length.

As more and more technologies rely on gold fingers, it is vital that we have them plated and tested to meet the highest standard and to ensure the highest performance. Rocket PCB provides the PCB with the highest quality for customers from different industries with our extensive experience.

Staged gold finger production demo

plated gold column highly-rated staged for wholesale-4

Key dimensions control

plated gold column highly-rated staged for wholesale-5

Product compare

plated gold column highly-rated staged for wholesale-6

Our advantages and services

◪ 24 hour real-time technical support
◪ Quick turnaround with 24 hours and instant quote
◪ Effective and flexible PCB engineering solutions save your cost
◪ State-of-the-art PCB including rigid, FPC, rigid-flex, metal base, RF/microwave, hybrid, HDI, embedded, LED, backplane, ceramic substrate, IC substrate
◪ Strong partnerships with different reputed material suppliers such as Rogers, Arlon, Nelco and Taconic can realize a fast service to a wide range of PCB applications
◪ Superb quality are guaranteed under the ISO9001, ISO14001, TS16949, OHSAS18001, ISO/IEC27001 system, insist on adopting 5S methods, Lean Six Sigma quality systems
◪ Complete service from free DFM, traceable manufacturing to complete after-sales service
◪ On time delivery more than 99%

Product application

plated gold column highly-rated staged for wholesale-7

Consumer electronics

plated gold column highly-rated staged for wholesale-8

Automotive electronics

plated gold column highly-rated staged for wholesale-9

Communications

plated gold column highly-rated staged for wholesale-10

Energy

plated gold column highly-rated staged for wholesale-11

Industrial & Instrumentation

plated gold column highly-rated staged for wholesale-12

IOT/Smart Home

plated gold column highly-rated staged for wholesale-13

Medical electronics

plated gold column highly-rated staged for wholesale-14

Security Industry

Company Features
1. Rocket PCB Solution Ltd. achieves a great success at abroad market for its high quality gold column with reasonable price.
2. Equipped with international advanced equipment, we can ensure consistent high quality of motherboard pcb.
3. High quality of gold finger pcb is the top thing in Rocket PCB Solution Ltd.. Call!

g******o

Thanks to the low cost of raw materials and the high efficiency of streamlined production, motherboard pcb products have the advantage of high gross profit margin. Its simple design makes it easier for users to maintain and manipulate

z******g

Rocket PCB gold finger pcb comes in a variety of wonderful designs. The product is widely applied in consumer electronics

n******q

High technical assurance and first-class quality can be seen on motherboard pcb. It takes less time in assembling a circuit as compared to the conventional method

k******h

All raw materials used to manufactured Rocket PCB equal length have to go through stringent quality checking procedure. It is properly laid out, giving less electronics noise

w******b

The design of Rocket PCB gold column focuses on the technique and function. It takes less time in assembling a circuit as compared to the conventional method

a******u

equal length has advantages both in cost, reliability and long life, in comparison with other similar products. It is subjected to extreme heat and soldered into place