gold column | Gold Finger PCB

Product Information
Customer Reviews

Company Advantages
1. The most of Rocket PCB plated holes is manufactured on the Flexo-Folder-Gluer (FFG) machines which are combining printing, die-cutting, folding and gluing. Those processes can be also performed on separate machines. It reduces the component welding points and is possible in the reduction of the failure rate
2. Rocket PCB Solution Ltd. is in line with top-notch service and first-class product management concepts. The product is widely applied in consumer electronics
3. The product provides a consistent quality of light over time and has long-lasting performance, which allows users to use for a long time. The product allows the installation and repair process to be convenient
4. This product takes only microseconds to achieve its full brightness. It is cycled between on and off frequently and it won't burn out quickly. It offers a simple platform to arrange the electronic components in a compressed way

Rocket PCB supports gold-plated finger PCB, immersion gold gold finger PCB, hard golden finger PCB, flash gold gold finger PCB, long-short gold finger PCB, staged gold finger (graded golden finger) PCB production. Gold-plated fingers put forward higher requirements for the production process. If the experience is insufficient, it is easy to cause bad problems such as blackening, whitening, pollution, side corrosion, scratches, size discrepancy and so on.

Rocket PCB has rich experience in this field, and has accumulated many years of production experience. Through process improvement, film optimization, liquor adjustment, plating parameters and other links of optimization, it has completely realized zero defect, which is highly appreciated by customers.

product-Rocket PCB gold plated holes highly-rated for import-Rocket PCB-img

What is a gold finger

Gold finger is the generic name of the gold-plated connector that runs on the edge of the PCB prototype. Because they are golden, long and thin, they are similar to fingers, so we call it gold finger.

Some common applications of golden fingers are:

◪ Provide interconnection points for transmitting network data.
◪ Where a sub-board or dedicated adapter is attached
◪ Connect external components to the prototype PCB
◪Use as an audio adapter

Elctroplate process

ENIG: ENIG is more cost-effective and easier to solder than the electric gold plating. But its soft and thin (usually 2-5u ")composition makes the ENIG unsuitable for achieving the abrasion effect caused by the circuit board insertion and removal.
Electroplated Hard gold: This gold is solid (hard) and thick (usually 30u "), so it is more ideal for achieving the abrasive effects caused by constant PCB usage.

There are many meticulous steps involved in the process of plating gold fingers. To ensure that all of these fingers and slots fit, each PCB must pass a series of inspections and defect tests.

TYPES OF GOLD FINGER

Conventional gold finger：Gold finger is of equal length.
Staged gold finger PCB ：The etching pattern of the golden finger position needs to be realized by multiple film pasting, exposure and solder masking. The position and pattern need to be strictly and accurately controlled.
Long-short gold finger PCB：Its process is similar to the staged gold finger, which requires multiple exposure and electroplating to obtain the graphics of the long- short gold finger and requires the following design rules: plated holes, SMD and pads should not be placed within 1.0 millimeters of the gold finger; plated pads cannot exceed 40 millimeters in length.

As more and more technologies rely on golden fingers, it is vital that we have them plated and tested to meet the highest standard and to ensure the highest performance. Rocket PCB provides the PCB with the highest quality for customers from different industries with our extensive experience.

Staged gold finger production demo

product-Rocket PCB-img

Key dimensions control

product-Rocket PCB-Rocket PCB gold plated holes highly-rated for import-img

Product compare

Rocket PCB gold plated holes highly-rated for import-Rocket PCB-img-1

Our advantages and services

◪ 24 hour real-time technical support
◪ Quick turnaround with 24 hours and instant quote
◪ Effective and flexible PCB engineering solutions save your cost
◪ State-of-the-art PCB including rigid, FPC, rigid-flex, metal base, RF/microwave, hybrid, HDI, embedded, LED, backplane, ceramic substrate, IC substrate
◪ Strong partnerships with different reputed material suppliers such as Rogers, Arlon, Nelco and Taconic can realize a fast service to a wide range of PCB applications
◪ Superb quality are guaranteed under the ISO9001, ISO14001, TS16949, OHSAS18001, ISO/IEC27001 system, insist on adopting 5S methods, Lean Six Sigma quality systems
◪ Complete service from free DFM, traceable manufacturing to complete after-sales service
◪ On time delivery more than 99%

Product application

video-Rocket PCB gold plated holes highly-rated for import-Rocket PCB-img-1

Consumer electronics

application-Rocket PCB gold plated holes highly-rated for import-Rocket PCB-img-1

Automotive electronics

Communications

Energy

application-PCB prototype-pcb fabrication-PCB maker-Rocket PCB-img-1

Industrial & Instrumentation

IOT/Smart Home

Rocket PCB gold plated holes highly-rated for import-Rocket PCB-img-1

Medical electronics

Rocket PCB gold plated holes highly-rated for import-PCB prototype-pcb fabrication-PCB maker-Rocket -1

Security Industry

Company Features
1. Rocket PCB Solution Ltd. is one of those competitive companies in the field of gold column .
2. We focus on the organic combination of plated holes in the development.
3. Rocket PCB can give customers more value than other brands. Contact us!

Favorable rate

100%

Buyer impression