quick double sided printed circuit board bulk sided digital device

Company Advantages
1. In the designing stage of Rocket PCB double sided printed circuit board , thermodynamics and the law of heat conduction theories are taken into consideration by the designers. It is subjected to extreme heat and soldered into place
2. Well-known for refined quality, double sided printed circuit board can be customized. The product brings reliability in the performance of the circuit
3. double sided printed circuit board has all the features that matter on board. The product makes the process of replacing the particular failure components easier

Two-sided PCB model, the foremost normally surface treatment is HASL. At constant time, OSP, gold plating, immersion gold, immersion silver, is equally applicable.

HASL- sensible appearance, simple to weld tin on the pad, easy welding, low price.

ENIG- stable quality, sometimes employed in the case of boding IC.

For two sided board, using through hole within the middle connects two-sided traces, and there are 2 more processes than single aspect board, that is Electroless Copper and plating.

Double sided boards are wide used and relatively easy, each manufacturer can do, that the competition is usually on the price.

Some makers use low grade CCL, soldermask ink is also comparatively low cost, even the surface plating is skinny, leading to price variations.

At Rocket PCB, we have been using top-grade materials, never cut corners, quality is first-class, our strategy is tiny profits but fast turnover, therefore within the premise of quality assurance, our PCB price is extremely competitive, you're welcome to inquiry here to get quick quotation!

Customer requirements → engineering design materials → production work order MI→material cutting→baking board → drilling → electroless plating copper(PTH) →copper surface plating→ grinding Brush→ pattern exposure → develop→plating copper and tin →strip film→ etching → strip tin →soldermask→Immersion Gold→Routing→ET→HASL→FQC→warehouse

1, Cutting Material: Cut out easy-to-process dimensions from the whole sheet of copper clad laminate (CCL) with a certain thickness and foil thickness

2, Drilling: Drilling a conductive hole or plug-in hole on the board according to the computer drilling program
3, PTH: A thin layer of chemical copper is deposited in the drilled hole, with the aim of sinking a layer of copper through chemical methods in non-conductive epoxy glass cloth substrates (or other substrates), making it easy for the rear plating guide to form the circuit pattern;
4, Full Plate Copper Plating: The main purpose is to protect the thin layer of chemical copper from oxidation in the air, forming no copper or holes in the holes.
5, Circuits (graphics transfer) is pasted with dry film on board. After exposure and development, circuit graphics are made.
6, Pattern plating: Wire copper thickening plating on pattern circuit, so that the hole and pattern copper thickness reached a certain thickness, can load a certain amount of current
7, Etching: Fade The graphics ink or dry film, etching off the excess copper foil to obtain conductive line graphics. Remove the pattern ink or dry film, etch out the excess copper foil to get the conductive graphics
8, Remove tin: The tin layer on the formed graph is removed to reveal the required pattern
9, Silk screen soldermask or paste soldermask dry film: Printing a layer of soldermask ink on the board, or affixed with a layer of soldermask dry film, after exposure, development to form soldermask layer, the main purpose is to prevent short circuit between the lines at the time of soldering
10, Immersion Gold/HASL: Immersion gold or spray a layer of tin on the board where it needs to be welded, making it easy to solder, while also preventing oxidation of the copper surface at the place
11, Silkscreen: printing some iconic words on the board, mainly convenient for customers to install components
12, Routing: Process the profile of the Board
13, Electrical test: Detecting whether there is an open short circuit in the PCB by means of a closed loop

> Senior R &D team, tailor-made application solutions, like high speed, high capacity and high frequency, press-fit, heat-sink solutions

> In general, customers provide gerber files and Rocket senior R&D engineers team audit and optimize them free of charge (Free DRC and DFM)

> For customers with special requirements, we can provide personalized solutions, design drawings, develop new products, and provide relevant technical support according to their needs and combined with our practical experience.

Rocket PCB supply chain meticulously practices all-around quality management and actively introduces and implements multi-domain system management. We have successively obtained ISO9001, ISO14001, IATF16949, OHSAS18001, ISO/IEC27001, ISO13485 and AS9100 certifications.

Due to the circuit board industry manufacturing level is uneven, if accidentally selected to the low-end manufacturing plant, there will be poor engineering data processing, old equipment, management confusion, poor parameter control, improper operation of personnel and other process issues, such as the following quality defects.

Company Features
1. Rocket PCB Solution Ltd. has been operating for many years and has been considered a reliable manufacturing factory for .
2. We have the capability of researching and developing state-of-the-art technologies of double sided printed circuit board .
3. We have achieved some progress in our environment protection. We have installed energy-saving illumination bulbs, introduced energy-saving production and working machines to ensure no energy is consumed when they are not in use.