Rocket PCB provides gold finger PCB, long-short gold finger PCB, staged gold finger PCB fabrication. Gold finger PCB advocate higher necessities for the producing technology. If you do not have enough expertise, it's straightforward to cause unhealthy issues like darkening, whitening, contamination, lateral erosion, scratch and alternative issues.
Rocket PCB has intensive expertise during this field and has accumulated a few years of process expertise. Through method optimisation, improve film alignment, liquid concentration management, plating parameters and alternativelinks of optimisation. Our gold finger quality totally meets client necessities, won client appreciation.
A unique PCBA needs to be interconnected with the motherboard, however it additionally must be simplyreplaced. Style a gold finger connected to the socket, just like the connection between the facility plug and socket. as a result of gold has smart conductivity, inertia is powerful, it will make sure the semiconductive impact whereasnot oxidizing, at identical time, it also can guarantee adequate physical phenomenon when frequent insertion as a result of gold is wear-resistant.
Some common applications of golden fingers are:
◪ Provide interconnection points for transmitting network data.
◪ Where a sub-board or dedicated adapter is attached
◪ Connect external components to the prototype PCB
ENIG is more cost-effective and easier to solder than the electric gold
plating. But its soft and thin (usually 2-5u ")composition makes the
ENIG unsuitable for achieving the abrasion effect caused by the circuit
board insertion and removal.
Electroplated Hard gold: This gold is solid (hard) and thick (usually 30u "), so it is more ideal for achieving the abrasive effects caused by constant PCB usage.
are many meticulous steps involved in the process of plating gold
fingers. To ensure that all of these fingers and slots fit, each PCB
must pass a series of inspections and defect tests.
Standard gold finger：Gold fingers are of equal length.
Staged gold finger PCB ：The etching pattern of the golden finger position needs to be realized by multiple film pasting, exposure and solder masking. The position and pattern need to be strictly and accurately controlled.
Long-short gold finger PCB：Its process is similar to the staged gold finger, which requires multiple exposure and electroplating to obtain the graphics of the long- short gold finger and requires the following design rules: plated holes, SMD and pads should not be placed within 1.0 millimeters of the gold finger; plated pads cannot exceed 40 millimeters in length.
As more and more technologies rely on gold fingers, it is vital that we have them plated and tested to meet the highest standard and to ensure the highest performance. Rocket PCB provides the PCB with the highest quality for customers from different industries with our extensive experience.
Key dimensions control
◪ 24 hour real-time online consult
◪ Fast turn around with 24 hours and fast quote
◪ Outstanding PCB engineering and producing solutions save your cost
◪ Diverse PCB including rigid, FPC, rigid-flex, metal base, RF/microwave, hybrid, HDI, embedded, LED, backplane, ceramic substrate, IC substrate
◪ Special materials such as Rogers, Arlon, Nelco and Taconic can realize a wide range of PCB applications
◪ Superb quality are guaranteed under the ISO9001, ISO14001, TS16949, OHSAS18001, ISO/IEC27001 system, insist on adopting 5S methods, Lean Six Sigma quality systems, UL, ROHS certification
◪ Free DFM, traceable manufacturing to complete after-sales service
◪ On time delivery more than 99%
Contact us: email@example.com, prompt response!