Gold fingers PCB edge connector gold fingers plating

Product Information

Company Advantages
1. Rocket PCB achieves a reliable and correct quality of gold finger pcb . It is the perfect choice for manufacturers of electronic components, instruments, and equipment
2. Whether the motivations are economic, environmental, or personal, the benefits of this product will have something to offer for everyone. It improves the wiring density and reduces the spacing of components
3. The product is in line with international standards in performance, durability, usability and other aspects. The product features low electric currents and radiation emission
4. The product has the characteristics of long service life, excellent performance and stable performance. It takes less time in assembling a circuit as compared to the conventional method
5. In our strict quality assurance procedures, any defects of the products have been avoided or eliminated. It is properly laid out, giving less electronics noise

About our product

Rocket PCB provides gold finger PCB, long-short gold finger PCB, staged gold finger PCB fabrication. Gold finger PCB advocate higher necessities for the producing technology. If you do not have enough expertise, it's straightforward to cause unhealthy issues like darkening, whitening, contamination, lateral erosion, scratch and alternative issues.

Rocket PCB has intensive expertise during this field and has accumulated a few years of process expertise. Through method optimisation, improve film alignment, liquid concentration management, plating parameters and alternativelinks of optimisation. Our gold finger quality totally meets client necessities, won client appreciation.

Why design gold finger

A unique PCBA needs to be interconnected with the motherboard, however it additionally must be simplyreplaced. Style a gold finger connected to the socket, just like the connection between the facility plug and socket. as a result of gold has smart conductivity, inertia is powerful, it will make sure the semiconductive impact whereasnot oxidizing, at identical time, it also can guarantee adequate physical phenomenon when frequent insertion as a result of gold is wear-resistant.

Generally speaking, the golden finger implies that these fingers square measure plated with 5-30u” hard gold. hard gold has higher wear resistance and might be secured 20,000 times insertion while not affecting the quality, it should be over 5u” thick. However, the process technology of hard gold is comparatively complicated, and also the high thickness of gold consumes a lot of gold salt, that directly ends up in high price. In fact, several PCBs don't need frequent insertion, don't ought to do thick gold, or maybe don't do hard gold, directly do immersion gold replacement (soft gold, the gold thickness is usually 1-3 u”). It will effectively scale back the purchase price of PCB.

Some common applications of golden fingers are:

◪ Provide interconnection points for transmitting network data.
◪ Where a sub-board or dedicated adapter is attached
◪ Connect external components to the prototype PCB
◪Use as an audio adapter

news-Rocket PCB-Rocket PCB professional gold finger pcb plating for import-img

product-Rocket PCB professional gold finger pcb plating for import-Rocket PCB-img

Elctroplate process

ENIG: ENIG is more cost-effective and easier to solder than the electric gold plating. But its soft and thin (usually 2-5u ")composition makes the ENIG unsuitable for achieving the abrasion effect caused by the circuit board insertion and removal.
Electroplated Hard gold: This gold is solid (hard) and thick (usually 30u "), so it is more ideal for achieving the abrasive effects caused by constant PCB usage.

There are many meticulous steps involved in the process of plating gold fingers. To ensure that all of these fingers and slots fit, each PCB must pass a series of inspections and defect tests.

TYPES OF GOLD FINGER

Standard gold finger：Gold fingers are of equal length.
Staged gold finger PCB ：The etching pattern of the golden finger position needs to be realized by multiple film pasting, exposure and solder masking. The position and pattern need to be strictly and accurately controlled.
Long-short gold finger PCB：Its process is similar to the staged gold finger, which requires multiple exposure and electroplating to obtain the graphics of the long- short gold finger and requires the following design rules: plated holes, SMD and pads should not be placed within 1.0 millimeters of the gold finger; plated pads cannot exceed 40 millimeters in length.

As more and more technologies rely on gold fingers, it is vital that we have them plated and tested to meet the highest standard and to ensure the highest performance. Rocket PCB provides the PCB with the highest quality for customers from different industries with our extensive experience.

Staged gold finger production demo

product-Rocket PCB-img

Key dimensions control

product-Rocket PCB-img

Product compare

product-Rocket PCB-img

Our advantages and services

◪ 24 hour real-time online consult
◪ Fast turn around with 24 hours and fast quote
◪ Outstanding PCB engineering and producing solutions save your cost
◪ Diverse PCB including rigid, FPC, rigid-flex, metal base, RF/microwave, hybrid, HDI, embedded, LED, backplane, ceramic substrate, IC substrate
◪ Special materials such as Rogers, Arlon, Nelco and Taconic can realize a wide range of PCB applications
◪ Superb quality are guaranteed under the ISO9001, ISO14001, TS16949, OHSAS18001, ISO/IEC27001 system, insist on adopting 5S methods, Lean Six Sigma quality systems, UL, ROHS certification
◪ Free DFM, traceable manufacturing to complete after-sales service
◪ On time delivery more than 99%

Product application

product-Rocket PCB-Rocket PCB professional gold finger pcb plating for import-img

Consumer electronics

Rocket PCB professional gold finger pcb plating for import-Rocket PCB-img-1

Automotive electronics

video-Rocket PCB professional gold finger pcb plating for import-Rocket PCB-img-1

Communications

application-Rocket PCB professional gold finger pcb plating for import-Rocket PCB-img-1

Energy

Industrial & Instrumentation

IOT/Smart Home

application-PCB prototype-pcb fabrication-PCB maker-Rocket PCB-img-1

Medical electronics

Security Industry

Company Features
1. Rocket PCB Solution Ltd. is a large-scale and specialized company of gold finger pcb .
2. With the help of technology innovation, Rocket PCB Solution Ltd. makes a big stride on technology improvement.
3. Our ultimate goal is to become an international motherboard pcb supplier. Inquiry!