hybrid printed circuit board testing material production for electronics

Company Advantages
1. New technologies are utilized in the design of Rocket PCB material pcb to transfer its construction to technical implementation. These technologies include multi-material 3D printing, advances in materials science and new capabilities in simulation software.
2. Its high-quality fabric allows as much air to pass through it as possible to enable the breathability of this product.
3. The product is highly sanitary. So people can set assured that it will not contain harmful substances when using it.
4. The product is perfectly suitable for those event planners or participants who don't want a rainy or windy to interrupt the event.

Because it is a high frequency signal transmission, the characteristic impedance of the finished printed board wire is required to be strict, and the line width of the board usually requires ±0.02mm. Therefore, the etching process needs to be strictly controlled, and the negatives used for optical imaging transfer should be compensated according to the line width and copper foil thickness.
The lines of such printed boards do not transmit current, but high-frequency electrical pulse signals, and defects such as pits, notches and pinholes on the wires affect transmission, and any such minor defects are not allowed. Sometimes, the thickness of the soldermask will also be strictly controlled, too thick or too thin soldermask on the line which a few microns will also be judged unqualified.
Thermal shock 288℃,10 seconds, 1~3 times, no hole wall separation.

For PTFE plate, to solve the wetting in the hole, there is no cavity in the PTH, the copper layer electroplated in the hole to withstand thermal shock, which is one of the difficulties in making the Teflon board

Satellite receivers, base antennas, microwave transmissions, automotive telephones, global positioning systems, satellite communications, communication equipment connectors, receivers, signal oscillators, home appliances networking, high-speed running computers, oscilloscopes, IC test instruments, etc., high-frequency communications. Frequency communication, high-speed transmission, high confidentiality, high transmission quality, high memory capacity processing and other communications and computer fields need high-frequency microwave printed boards

Company Features
1. Since its inception, Rocket PCB Solution Ltd. has been committed to the development and manufacture of printed circuit board testing .
2. Rocket PCB Solution Ltd. has been praised as the world's leading enterprise.
3. We have been long aware of the importance of harmonious development of economic benefits and environmental benefits. We will support environmental protection with science and technology. For example, we will introduce a multitude of environmental-friendly manufacturing facilities to reduce negative environmental impact. Rocket PCB Solution Ltd. has a standard raw material inspection procedure. We have established a supervisory mechanism that is consist of members of our company to supervise and direct our behavior. This mechanism can guide our behavior to be environmental-friendly. Ask online! Our goal is to have no accidents and to mitigate impacts on the environment by working with our stakeholders, peers, and others to promote responsible environmental practices and continuous improvement.